To Next PageTo Next Page
Need help?Do you have a question about the Jonsered GC2126C and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Line Diameter | 2.4 mm |
| Shaft Type | Straight |
| Handle Type | Loop |
| Displacement | 25.4 cc |
Key safety points to read before operation.
Essential gear for operator safety during use.
Details on safety features and their maintenance.
Guidance on choosing, using, and maintaining cutting tools.
Instructions for attaching the J-handle to the shaft.
Procedure for connecting and disconnecting the two-piece shaft.
Steps for correctly fitting and adjusting the operator's harness.
Mounting the harness clamp onto the shaft securely.
Steps to adjust the harness for proper fit and balance.
Correctly attaching cutting attachments to the drive disc.
Securing the blade guard and attaching grass cutting tools.
Attaching the trimmer guard and trimmer head.
Essential safety measures when handling fuel.
Specifications and mixing ratios for fuel and oil.
Step-by-step guide for mixing fuel and filling the tank.
Essential checks to perform before starting the engine.
Detailed steps for starting the engine from cold or warm.
How to safely stop the engine using the stop switch.
Basic guidelines for safe and effective operation.
Fundamental safety practices to follow during operation.
Core methods for efficient and safe machine usage.
Methods for clearing grass using a grass blade.
Proper techniques for trimming and clearing with the trimmer head.
Techniques for cutting grass in difficult-to-reach areas.
Using the trimmer's fan effect for clearing debris.
Procedure for adjusting the engine's carburetor.
Checks and cleaning for the machine's muffler.
Inspection, cleaning, and replacement of the spark plug.
Lubricating the splined coupling of the two-piece shaft.
Steps for cleaning and replacing the air filter.
Checking and topping up grease in the bevel gear.
Proper techniques for sharpening grass cutters and blades.
Overview of daily, weekly, and monthly maintenance tasks.
Key technical data for engine, fuel, and lubrication.
Measured noise and vibration data for operator safety.
List of compatible accessories and their part numbers.
Official statement of compliance with EC directives.
