28 – English
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
Technical data GR 2032D GR 2036
Engine
Cylinder displacement, cm
3
30,8 36,3
Cylinder bore, mm 35 38
Stroke, mm 32 32
Idle speed, rpm 2700 2700
Recommended max. speed, rpm 11000-11700 11000-11700
Speed of output shaft, rpm 10000 10000
Max. engine output, acc. to ISO 8893, kW/ rpm 1,1/8400 1,3/9000
Catalytic converter muffler Yes Yes
Speed-regulated ignition system Yes Yes
Ignition system
Manufacturer/type of ignition system Walbro CD Walbro CD
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, mm 0,5 0,5
Fuel and lubrication system
Manufacturer/type of carburettor Walbro WT Walbro WT
Fuel tank capacity, litre 0,5 0,5
Weight
Weight without fuel, cutting attachment and guard, kg 6,5 7,3
Noise emissions
(see note 1)
Sound power level, measured dB(A) 108 109
Sound power level, guaranteed L
WA
dB(A) 108 110
Noise levels
(see note 2)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.:
90/100 92/101
Vibration levels
Vibration levels at handles, measured according to EN/
ISO 11806 and ISO 7916, m/s
2
At idle, left/right handles, min.: 2,5/2,5 2,2/2,7
At idle, left/right handles, max.: 3,0/3,5 2,7/4,3
At max. speed, left/right handles, min.: 2,0/2,0 3,5/5,0
At max. speed, left/right handles, max.: 5,1/4,9 4,5/6,2
To Next Page
Loading...
