Jonsered LT2114 User Manual

LT2114
115 52 23-27 Rev. 2
Instruction manual
Please read these instructions care ful ly and
make sure you understand them before using
this machine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorgfältig durch
und vergewissern Sie sich, daß Sie diese verste-
hen, bevor Sie die Maschine in Betrieb nehmen.
Manuel d’instructions
Merci de lire trés attentivement le manuel
d'instructions. Assurez-vous d'avoir tout compris
avant d'utiliser ce tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y comprenda estas
intrucciones antes de usar esta maquina.
Manuale di istruzioni
Prima di utilizzare la macchina leggete queste
istruzioni con attenzione ed accertatevi di averle
comprese bene.
Instructieboekje
Lees deze instructies aandachtig en zorg dat u ze
begrijpt voordat u deze ma chine gebruikt.

Jonsered LT2114 Specifications

General

Brand	Jonsered
Model	LT2114
Category	Lawn Mower
Language	English

Summary

Safety Rules

Operator Training and Familiarization

Operator training, controls, and proper use of the equipment.

Pre-Operation Preparation and Safety

Pre-use checks, fuel safety, and area inspection.

Safe Operation Procedures

Guidelines for safe operation, including slopes and attachments.

Maintenance and Storage Safety

Functional Description

Control Identification and Location

Brake, Clutch, and Gear Controls

Cutting Unit Controls

Ignition and Starting Controls

Driving Operation and Safety Systems

Instructions for driving, including safety systems and ROS.

Before Starting Procedures

Engine Fueling

Safe procedures for filling the fuel tank with petrol.

Engine Oil Level Check

How to check and maintain the engine oil level.

Driving and Operation

Starting the Engine

Step-by-step guide for starting the tractor's engine.

Ignition Key and Throttle Operation

Switching Off the Engine

Operator Presence and ROS Safety Systems

Functionality and checks for operator presence and ROS safety systems.

Maintenance and Adjustments

Pre-Operation Maintenance Checks

Routine Maintenance Tasks

Cutting Unit Service

Troubleshooting

Engine Starting Problems

Common issues and solutions when the engine fails to start.

Engine Running Issues

Troubleshooting for uneven running, weakness, or overheating.

Machine Vibration and Cutting Issues