To Next PageTo Next Page
Need help?Do you have a question about the Jonsered LT2117CMA and is the answer not in the manual?
General| Brand | Jonsered |
|---|---|
| Model | LT2117CMA |
| Category | Lawn Mower |
| Language | English |
Operator training, responsibilities, and basic safety principles for mower use.
Pre-operation checks, safe fuel handling, and area inspection.
Guidelines for safe mowing, slope limits, and hazard avoidance.
Precautions for safe maintenance, storage, and fire hazard reduction.
Step-by-step guide to install the steering wheel components correctly.
Procedures for installing and adjusting the operator's seat for comfort.
Instructions for battery installation and essential safety measures.
Guide for attaching the grass bagger components to the tractor.
Instructions for assembling and fine-tuning the grass bagger for proper function.
Diagram and identification of all controls on the operator panel.
Multilingual identification of control locations on the dashboard.
Operation of the throttle, choke, and light switch for engine control.
Understanding the brake/clutch pedal, motion control lever, and free-wheel operation.
Operation of the attachment clutch, lifting/lowering lever, and cutting height adjustment.
Proper use of the ignition lock system for starting and securing the tractor.
Procedures for engaging and disengaging the parking brake.
How to use the free-wheel control lever for towing or moving the tractor.
Using the choke for starting and adjusting the cutting unit height.
Safe procedures for filling the fuel tank, including handling precautions.
How to check and maintain the engine oil level correctly.
Regular checks for correct tire inflation pressure.
Step-by-step guide to start the engine and prepare for operation.
Correct use of choke for cold starts and throttle for engine speed.
Turning the ignition key and setting engine speed for operation.
Specific cold start procedures and transmission purging for hydrostatic systems.
Basic driving instructions and critical safety warnings for slopes.
Tips for effective mowing and procedures for emptying the grass bagger.
Instructions for converting the mower between mulching, discharge, and bagging modes.
Correct steps for shutting down the engine and securing the tractor.
Essential safety steps and precautions before performing maintenance.
Procedures for opening, removing, and reinstalling the engine hood.
A schedule of routine maintenance tasks and their recommended intervals.
Detailed steps for draining and refilling the engine oil.
Importance of sharp blades and instructions for their removal, installation, and care.
How to adjust the tractor's brake system for optimal performance.
Step-by-step instructions for removing and reassembling the cutting unit.
Instructions for replacing the drive belt for the cutting unit.
How to adjust the cutting unit for proper side-to-side and front-to-back leveling.
Procedures for adjusting the transaxle motion control lever for neutral position.
Keeping the transaxle cooling fins and fan clean for optimal performance.
Diagnosing and resolving issues when the engine fails to start.
Troubleshooting issues where the starter motor does not engage.
Addressing issues like uneven running, low power, overheating, and charging failures.
Identifying and fixing causes of machine vibration and uneven grass cutting.
Steps for preparing the tractor for long-term storage, including cleaning and fluid changes.
Information required for ordering spare parts and contacting service centers.
