Jonsered LT2213 A - User Manual

To Next Page

LT2213 A

Instruction manual

Please read these instructions care ful ly and

make sure you understand them before using

this machine.

Anleitungshandbuch

Bitte lesen Sie diese Anleitungen sorgfältig durch

und vergewissern Sie sich, daß Sie diese verste-

hen, bevor Sie die Maschine in Betrieb nehmen.

Manuel d’instructions

Merci de lire trés attentivement le manuel

d'instructions. Assurez-vous d'avoir tout compris

avant d'utiliser ce tracteur.

Manual de las instrucciones

Por favor lea cuidadosamente y comprenda estas

intrucciones antes de usar esta maquina.

Manuale di istruzioni

Prima di utilizzare la macchina leggete queste

istruzioni con attenzione ed accertatevi di averle

comprese bene.

Instructieboekje

Lees deze instructies aandachtig en zorg dat u ze

begrijpt voordat u deze ma chine gebruikt.

Need help?

Do you have a question about the Jonsered LT2213 A and is the answer not in the manual?

This document describes the Jonsered LT2213 A, a ride-on lawnmower.

Function Description

The Jonsered LT2213 A is a ride-on lawnmower designed for cutting grass. It features a cutting unit with multiple blades and a drive system that allows the operator to control forward and reverse movement, as well as the cutting unit engagement. The machine is equipped with safety features to prevent accidents during operation and maintenance.

Important Technical Specifications

Model: LT2213 A
Engine: The manual refers to an internal combustion engine, likely gasoline-powered, with specific instructions for fuel filling and oil checks.
Cutting Width: 77 cm (30.3 inches)
Cutting Height: Adjustable from 38 mm to 102 mm (1.5 to 4 inches)
Transmission: The manual describes a forward/reverse drive pedal and a transmission system, indicating a hydrostatic or gear-driven transmission.
Speed: Forward speed ranges from 0 to 6.7 km/h (0 to 4.2 mph).
Tires: Recommended tire pressure is 1 bar (14.7 PSI) for front tires and 0.8 bar (12 PSI) for rear tires.
Weight: 190 kg (419 lbs)
Vibration:
- Vibration (EN 1033): 3.5 m/s²
- Vibration (EN 1032): 0.5 m/s²
Noise Level:
- LpA < 90 dBA
- LwA < 100 dBA
Battery: 12V, 6-10 Ampere-hours.
Dimensions: The manual includes diagrams of the cutting deck and overall machine, but specific overall dimensions are not explicitly listed in a single section.

Usage Features

The lawnmower is operated from a seated position and includes several controls:

Light Switch: For operating the machine's lights.
Throttle Control: Regulates engine speed and, consequently, blade speed.
Clutch/Brake Pedal: Used for declutching and braking the tractor and starting the engine.
Forward/Reverse Drive Pedal: Controls the direction and speed of movement.
Cutting Unit Engagement/Disengagement: A lever or control to engage and disengage the cutting blades.
Quick Lifting/Lowering of the Cutting Unit: A mechanism to quickly adjust the cutting height.
Ignition Lock: A key-operated switch with "OFF," "ROS ON," "ON," and "START" positions to control engine operation and safety features. "ROS ON" (Reverse Operation System) allows the cutting unit to operate in reverse.
Parking Brake: A lever or pedal to engage the parking brake.
Free-Wheel Control Lever: Used to tow the tractor without engine power.
Service Reminder/Hourmeter: Displays the total operating hours and indicates when service is required.

Safety Precautions: The manual emphasizes numerous safety rules, including:

Never operate on slopes greater than 5°.
Always wear appropriate personal protective equipment.
Keep children and bystanders away from the operating area.
Never allow children or untrained individuals to operate the machine.
Always check the area for obstacles before mowing.
Ensure the parking brake is engaged before dismounting.
Disconnect the spark plug wire before any maintenance or adjustments.
Do not refuel indoors or near open flames.
Avoid operating the machine in poor visibility or wet conditions.

Maintenance Features

Regular maintenance is crucial for the longevity and safe operation of the Jonsered LT2213 A. The manual provides a detailed service record table with recommended intervals for various tasks:

As Needed:

Change engine oil (without oil filter).
Change engine oil (with oil filter).
Lubricate pivot points.
Check brake operation.
Clean air screen.
Clean air filter and pre-cleaner.
Replace air cleaner paper cartridge.
Clean engine cooling fins.
Replace spark plug.
Check tire pressure.
Replace fuel filter.
Clean battery and terminals.
Check muffler.

Every 8 Hours:

Lubricate pivot points.
Clean air screen.
Check tire pressure.

Every 25 Hours:

Change engine oil (with oil filter).
Lubricate pivot points.
Clean air filter and pre-cleaner.
Replace air cleaner paper cartridge.
Check tire pressure.
Clean battery and terminals.

Every 50 Hours:

Change engine oil (with oil filter).
Lubricate pivot points.
Clean air screen.
Replace air cleaner paper cartridge.
Clean engine cooling fins.
Replace spark plug.
Check tire pressure.
Clean battery and terminals.
Check muffler.

Every 100 Hours:

Change engine oil (with oil filter).
Lubricate pivot points.
Clean air screen.
Replace air cleaner paper cartridge.
Clean engine cooling fins.
Replace spark plug.
Check tire pressure.
Replace fuel filter.
Clean battery and terminals.
Check muffler.

Every 200 Hours:

Change engine oil (with oil filter).
Lubricate pivot points.
Clean air screen.
Replace air cleaner paper cartridge.
Clean engine cooling fins.
Replace spark plug.
Check tire pressure.
Replace fuel filter.
Clean battery and terminals.
Check muffler.

Specific Maintenance Procedures:

Engine Oil: Check oil level before each use.
Fuel System: Use pure unleaded gasoline. Do not overfill.
Battery: Charge the battery for a minimum of one hour per month during storage.
Blades: Inspect blades regularly for sharpness and damage. Replace or sharpen as needed.
Cutting Deck: Instructions for removing and installing the cutting unit, replacing the mower drive belt, and adjusting the level of the mower deck.
Transmission: Instructions for checking and maintaining the transmission cooling system.
Troubleshooting: A dedicated section helps diagnose common issues like the engine not starting, poor cutting, or battery not charging.
Storage: Clean the machine thoroughly, drain fuel, remove the battery, and store in a dry, frost-free place.