English – 3
CONTENTS
List of contents
SYMBOL EXPLANATION
Symbols ............................................................................... 2
CONTENTS
Before using a new machine ................................................. 3
List of contents .................................................................... 3
SAFETY INSTRUCTIONS
Personal protective equipment ............................................. 4
The machine‘s safety equipment .......................................... 4
Control, maintenance and service of the machine‘s safety
equipment ...................................................................... 7
Cutting equipment ............................................................ 10
General safety instructions ................................................. 11
General working instructions ............................................. 12
Basic clearing techniques .................................................... 13
WHAT IS WHAT?
What is what on the clearing saw (GR41/GR50/RS44)? .... 17
What is what on the clearing saw (RS51)? .......................... 18
ASSEMBLY
Assembling the handlebars ................................................. 19
Transport position, handlebars ........................................... 19
Assembly of the blade and trimmer head............................ 20
Assembling the blade guard and grass blade ....................... 20
Assembling the blade guard and clearing blade................... 20
Assembling the spray guard and trimmer head
Trimmy SII .................................................................. 21
Assembling other guards and cutting equipment ................ 21
Adjusting the harness and clearing saw ............................... 21
FUEL HANDLING
Fuel mixture ...................................................................... 22
Fuelling.............................................................................. 22
START AND STOP
Control before starting....................................................... 23
Start and stop..................................................................... 23
MAINTENANCE
Carburettor ........................................................................ 24
Muffler .............................................................................. 25
Cooling system .................................................................. 25
Air filter ............................................................................. 25
Angle gear .......................................................................... 25
Spark plug.......................................................................... 26
Filing the grass blade .......................................................... 26
Sharpening the clearing blade ............................................ 26
Maintenance schedule ........................................................ 27
TECHNICAL DATA
GR41................................................................................. 28
GR50................................................................................. 28
RS44.................................................................................. 28
RS51.................................................................................. 28
Before using a new machine
• Read the Operator‘s Manual carefully.
• Check the assembly and adjustment of the cutting
equipment. See page 20-21.
• Start the machine and check the carburettor settings. See
page 23-24.
IMPORTANT! A too lean carburettor adjustment significantly
increases the risk of an engine breakdown.
Insufficient care of the air filter will cause deposits on the spark
plug resulting in starting difficulties.
!
WARNING!
Under no circumstances may the design
of the machine be modified without the
permission of the manufacturer. Always
use genuine accessories. Non-authorised
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
To Next Page
Loading...
Need help?
General
