LED screen Possible faults Possible steps
RED LED flashes and LED 2
flashes green when the bat-
tery pack is installed.
Internal battery
temperature is too
low or too high
The internal temperature in the battery must be between -15°C
(5°F) and 70°C (158°F). The environment temperature in the
battery pack is too low or too high.
• If the battery pack is too cold from the ambient environ-
ment, move the battery pack and battery charger to a warm
environment.
• If the battery pack is too hot, especially after operation,
move the battery pack and battery charger away from the
hot environment.
TECHNICAL DATA
unit T2258 Li (BLT58VJN)
Motor specifications
Motor type Brushless
Motor voltage V (DC) 58
Motor power W 750
Battery and charger specifications
Default battery pack type 140Li
Battery charger type 440Ci
Noise and vibration data
Equivalent vibration level (ahv, eq) front handle.
See Note 1.
m/s
2
0.932
Equivalent vibration level (ahv, eq) rear handle.
See Note 1.
m/s
2
1.707
Sound power level, guaranteed (LWA). See Note
2.
dB(A) 96
Sound power level, measured. See Note 2. dB(A) 94.97
Sound pressure level at operator's ear. See Note
3.
dB(A) 83.8
Product dimensions
Weight kg (lb) 3.69 (8.14)
Cutting width cm (in) 40.6 (16)
Note 1: Reported data for equivalent vibration level has
a typical statistical dispersion (standard deviation) of 1.5
m/s
2
.
Note 2: Noise emissions in the environment measured
as sound power (LWA) in conformity with EC directive
2000/14/ EC. Reported sound power level for the
machine has been measured with the original cutting
attachment that gives the highest level. The difference
between guaranteed and measured sound power is that
the guaranteed sound power also includes dispersion in
the measurement result and the variations between
different machines of the same model according to
Directive 2000/14/EC.
667 - 002 - 18.05.2018 13
To Next Page
Loading...
Need help?
General
