JOSAM laser AM
Measuring system
7
Measuring equipment
Turn angle gauge AM135.
Together with the laser projector measures maxi-
mum wheel turn, toe-out on turn, as well as posi-
tion for KPI and caster.
Turn plate AM585.
Designed to measure maximum turn, toe-out on
turn, as well as KPI and caster.
Compensation ramp AM931.
For example, compensation for height of the back
wheel when turn plate AM585 is used.
Non-friction plate AM268.
To be placed under wheel when adjusting toe-in or
toe-out.
Brake rod AM325.
To be placed between the brake pedal and seat in
order to brake the wheel during KPI measurement.
Calculation/database software AM1515 for use in
Windows as a complement to measurement test
report AM39.
To Next Page
Loading...
Need help?
General
