OPERATING MANUAL for
BRAKE UNITS
JB10/... JB16/... JB26/... JB40/... JB52/...
(Installation set)
JB
3 of 19
01.96/00/Scho
2 NOTES ON EMC LEGISLATION
The CE mark refers to Directive 72/73/EEC (93/68) on low voltage and
to [German] legislation on electromagnetic compatibility (EEC §5.2 9/92).
JB brake units are designed in accordance with standard IEC 947-4-2
for category B public mains and are within the published electro-
magnetic compatibility (EMC) limits.
The limits for emissions under the European standard do not preclude
interference with receivers within 10 m.
Installation of JB brake units must be carried out by staff trained in EMC.
The JB brake unit meets the requirements of the following standards or
equivalent documents:
1. IEC 947-4-2
2. EN 50081-2
3. EN 50082-2
JB brake units may be used only in "industry" without
further measures.
To Next Page
Loading...
Need help?
General