6 Servicing and testing
You can also install automatic lubricant dispensers. To prevent cor-
rosion on the skid plate, we recommend that the skid plate is
greased lightly during the above service intervals.
ADVICE!
When you clean the fifth wheel coupling, you may pro-
duce waste products that contain polluting substances.
We would like to point out that you must comply with the
various national waste regulations for the disposal of this
waste.
6.1.4 Grease specification
We recommend high-pressure grease (EP), e.g. JOST high-perfor-
mance lubricant (article no. SKE 013 440 000).
EN
JSK 36 & JSK 37 MUB 002 004 M01 (REV-C) 04-2019 17
JOST IND (REV-A) 06-2019
JSK 39
To Next Page
