9
4. Servicing
Warning! Any unauthorised changes to the product are
illegal! Only original spare parts may be used!
4.1. Replacing parts in the burn chamber
NB: Use tools with great care! The vermiculite plates may be
damaged if treated roughly.
1) First remove the log retainer
2) First lift the baffle (A) up. Turn the key (B) 90° and then
remove the key. Pull the back edge of the baffle down.
3) Turn one corner towards you and pull it out sideways.
4) Then remove the exhaust deflector (A) by raising it
slightly to begin with. Then push the exhaust deflector
backwards.
To Next Page
Loading...
