Joyonway PB554 - Interface Navigation and Heating Control; Navigating Control Interfaces; Manual Heating Operation

2
Press “ ” in the main interface to go to the function operation interface.
In the function operation interface, the icon will be shown in bigger size if the
cursor is on it. Press“ ”to move the cursor to the“ ”. Press “ ”to
move the cursor to the selected (bigger size) icon.if cursor selects “ ”,
press“ ”to go back to the main menu.
In the function operation interface, press“ ”
or“ ”to move the different function icons to
the middle of the screen(to select the icons). The
corresponding name and working status of the
function will be showed in the upside of the
screen, press“ ”to switch the working status
of the controlled function.
Move the cursor to setting icon“ ”. Press“ ” to enter into set interface.
In the set interface, the character will be highlighted if the cursor is on it. Press
“ ” or“ ” to move the cursor location. Press“ ” to enter into the
second level interface of the chosen function or change its status.
When the manual heating function is started, there will be a heating icon“ ”
added in the function operation interface. User can start heating function in the
function operation interface manually. When the manual heating function is
turned off, the icon will disappear.
Set interface:
Manual Heating:
When the green cursor is on“ ”or“ ”,
press“ ”to set the time period as “on” or
“off”. Press“ ”to enter into time setting. In
time setting, press“ ” to move the cursor.
Press“ ”and“ ”to operate time setting.
Press“ ”and“ ” to exit the time editing
and the cursor will move back to the left side.
Heating time
When the time setting is finished, press“ ”to return and store the setting.
1 2