Why are audios not outputting on JRC Data Loggers?
If audios aren't outputting, the audio volume in the Playback software or Windows OS may be too low, or muting may be enabled. Adjust the volume level or disable muting in both the Playback software and Windows OS.
Explains the meaning and usage of various icons employed in the manual and product for safety and correct operation.
Outlines the step-by-step procedure for using the playback software, from installation to data conversion.
Details the minimum system requirements for the computer to install and run the playback software.
Provides step-by-step instructions for installing the playback software on various Windows operating systems.
Guides the user through the process of removing the playback software from their PC.
Explains how to use the download software to transfer recorded data from the VDR/S-VDR unit.
Describes the structure of folders created when downloading recorded data, detailing the organization of playlists and data files.
Details the necessary steps to set up the playback software, including login and configuration.
Guides the user on launching the playback software from the launcher menu and the playback menu.
Provides instructions on how to properly close and exit the playback software application.
Describes the composition of the main playback screen, including its various blocks like Main, Status, Operation Panel, and Menu.
Details the functions of buttons and sections within the playback operation panel, such as time setting and playback controls.
Explains how to initiate and halt the playback process using the dedicated buttons.
Covers methods for adjusting the playback time, including using the slide bar, forward/rewind buttons, and the clock button.
Instructs on how to modify the playback speed, including options for normal, 2x, and 4x speeds.
Details how to control audio volume and select audio sources within the playback software.
Introduces the Voyage screen, which displays graphic and numeric data related to the ship's voyage.
Describes the Alarm/Status screen, which shows alarm information, engine telegraph status, door status, and other system indicators.
Explains the Radar screen, allowing users to view radar images and interact with icons and menu bars for effective display.
Covers the AIS screen, presenting graphic and list views of AIS targets and ship information.
Guides the user on how to view recorded sentences in the NMEA format using the Dump screen.
Explains how to print the current screen display using the Print button in the MENU Block.
Details how to access and view the VDR/S-VDR system configuration and information.
Provides instructions on how to move, expand, reduce, and customize the layout of the Voyage1 and Voyage2 screens.
Explains how to revert the screen layout to its default initial configuration using the Restore button.
Details how to launch the conversion software to convert recorded data into industry standard formats.
Guides the user through the process of converting all recorded data files to standard formats.
Explains how to perform partial conversion of recorded data by selecting specific files or folders.
Lists the file naming conventions and formats for converted data, including digital sensor data, audio, and radar display video.
Provides a step-by-step guide on how to safely eject the PC card from the VDR/S-VDR unit.
Details the process of playing back recorded data from a PC card, including creating playback folders and setting up software.
Explains how to stop the capsule recording process by operating the internal panel buttons.
Details the placement and indication of various data sentences within the screen blocks, categorized by screen, block, and section.
Explains the meaning and usage of various icons employed in the manual and product for safety and correct operation.
Outlines the step-by-step procedure for using the playback software, from installation to data conversion.
Details the minimum system requirements for the computer to install and run the playback software.
Provides step-by-step instructions for installing the playback software on various Windows operating systems.
Guides the user through the process of removing the playback software from their PC.
Explains how to use the download software to transfer recorded data from the VDR/S-VDR unit.
Describes the structure of folders created when downloading recorded data, detailing the organization of playlists and data files.
Details the necessary steps to set up the playback software, including login and configuration.
Guides the user on launching the playback software from the launcher menu and the playback menu.
Provides instructions on how to properly close and exit the playback software application.
Describes the composition of the main playback screen, including its various blocks like Main, Status, Operation Panel, and Menu.
Details the functions of buttons and sections within the playback operation panel, such as time setting and playback controls.
Explains how to initiate and halt the playback process using the dedicated buttons.
Covers methods for adjusting the playback time, including using the slide bar, forward/rewind buttons, and the clock button.
Instructs on how to modify the playback speed, including options for normal, 2x, and 4x speeds.
Details how to control audio volume and select audio sources within the playback software.
Introduces the Voyage screen, which displays graphic and numeric data related to the ship's voyage.
Describes the Alarm/Status screen, which shows alarm information, engine telegraph status, door status, and other system indicators.
Explains the Radar screen, allowing users to view radar images and interact with icons and menu bars for effective display.
Covers the AIS screen, presenting graphic and list views of AIS targets and ship information.
Guides the user on how to view recorded sentences in the NMEA format using the Dump screen.
Explains how to print the current screen display using the Print button in the MENU Block.
Details how to access and view the VDR/S-VDR system configuration and information.
Provides instructions on how to move, expand, reduce, and customize the layout of the Voyage1 and Voyage2 screens.
Explains how to revert the screen layout to its default initial configuration using the Restore button.
Details how to launch the conversion software to convert recorded data into industry standard formats.
Guides the user through the process of converting all recorded data files to standard formats.
Explains how to perform partial conversion of recorded data by selecting specific files or folders.
Lists the file naming conventions and formats for converted data, including digital sensor data, audio, and radar display video.
Provides a step-by-step guide on how to safely eject the PC card from the VDR/S-VDR unit.
Details the process of playing back recorded data from a PC card, including creating playback folders and setting up software.
Explains how to stop the capsule recording process by operating the internal panel buttons.
Details the placement and indication of various data sentences within the screen blocks, categorized by screen, block, and section.
General| Brand | JRC |
|---|---|
| Model | JCY-1700 |
| Category | Data Loggers |
| Language | English |
To Next Page
