JRC JCY-1700 - 8.2 How to play back PC card data in VDR;S-VDR

Chapter8 Copying Recorded Data in PC Card
Playback Software / Instruction Manual
87
8.2 How to play back PC card data in VDR/S-VDR
In order to play back recorded data of PC card, it is necessary to create a playback folder in the
computer of use advance, and to copy the data.
Shows the flow from setup to playback below.
① Create a playback folder in certain location before Setup. ⇒Refer to 8.2.1
② Set required information for playback with Setup software. ⇒Refer to 8.2.2
③ Start the Playback software, and copy a recorded data of PC card. ⇒Refer to 8.2.3
8.2.1 Creating a playback folder
(1) To create a playback folder, start My Computer.
(2) Create a folder as follows.
Playback data is copied to the folder made here.
C:\MV JRC
↑
E.g. Ship name
8.2.2 Setting required information for playback with the Setup software
(1) Click [PLAYBACK] icon from the “VDR INVESTIGATIVE SOFTWARE” launcher menu.
(2) To start up Setup software, click [SETUP] button from the “PLAYBACK” launcher menu.
[PLAYBACK] button
[SETUP] button