Need help?Do you have a question about the JRC JCY-1800 and is the answer not in the manual?
General| Brand | JRC |
|---|---|
| Model | JCY-1800 |
| Category | Data Loggers |
| Language | English |
Instructions on how to launch and begin using the maintenance software.
Procedures for safely closing the maintenance software application.
Description of the main screen for selecting operational tasks.
Lists available tasks like Installation, Playback, and Update.
Guide to initiating the installation of the maintenance software.
Steps to acquire system configuration data and run diagnostic functions.
Configuring the connection details for various sensors.
Detailed setup for the NSK connection, typically for heading and speed.
Setting up the Digital Signal Converter (DSC) option unit.
Configuring the connection parameters for radar units.
Setting up the connection details for microphone inputs.
Configuring the connections for VHF transceivers.
Comprehensive system setup for VDR/S-VDR configurations.
Configuring the capsule unit, including model and serial number.
Procedures for opening and saving system configuration files.
Explanation of the standard buttons available on the SYSTEM screen.
Display of sensor information and registered recording data.
Visual cues indicating modified settings and required actions.
Explanation of the diagnosis process and how to interpret results.
Detailed view of system operational status and error information.
Description of the operation buttons located on the left side of the screen.
Capabilities for saving and opening system configuration files via the file menu.
Steps to launch and initiate the EVENT monitor application.
Methods for viewing and altering the event list display.
Procedures for accessing recorded EVENT log files.
How to save all current event data into a file.
Functionality to record incoming EVENT data as a file.
How to directly start real-time monitors via the menu.
Monitoring NMEA sentence data in real-time.
Monitoring audio data recorded by the ARB.
Monitoring radar images recorded by the FGB.
Monitoring dry contact data and their current states.
Accessing the system status display interface.
Overview of the system status window and its components.
Procedures for initiating and stopping the diagnostic function for status.
Explanation for orange diagnosis lamps during normal system operation.
How to open and view system state and diagnostic results from files.
A reference table detailing menu functions and associated sections.
Controlling the VDR/S-VDR system using the maintenance software.
Converting recorded NMEA sensor data into a text file format.
Extracting setup files for various units from a SysInfo.dat file.
Displaying causes and countermeasures for OPU error codes.
Viewing the version information of the maintenance software.
Procedures for launching the playback software.
Information on the playback launcher and data sources (capsule, CF card).
Criteria and steps for verifying recorded data accuracy.
Verifying Radar image specifications for proper capture settings.
Steps for setting up and capturing Radar images using the FGB utility.
Performing various tuning adjustments for the Frame Grabber Board.
How to initiate the setup process for the option system.
Step-by-step guide for configuring the option system.
Display and update of registrant information for the system.
Setting the IP address for real-time monitor data output.
Selecting necessary data for real-time monitoring.
How to initiate the report function to create an installation report.
Steps for updating the software programs of MCB, ARB, and RMB units.
Procedures for updating the program of the Frame Grabber Board (FGB).
How to play back data downloaded from the capsule using Ethernet.
Steps to play back data stored on a CF card.
Instructions on how to properly close the playback software.
Instructions for removing previous versions of the software.
Step-by-step guide for installing the maintenance software.
To Next Page
