6. EVENT Monitor
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
89
DOC No. 7ZPNA4014
6. EVENT Monitor
Monitor the operation event of VDR/S-VDR to check that VDR/S-VDR system is working correctly.
The EVENT monitor can display a receiving EVENT data from the VDR/S-VDR.
Furthermore, the EVENT monitor can display EVENT Log files in the VDR/S-VDR additionally.
6.1. Starting
1) Click the [EVENT] button on the SYSTEM screen.
2) Select the display language of event data
Select English or Japanese with a radio button, and click the [OK] button.
3) Start the Event monitor
The EVENT monitor is started automatically.
If EVENT data are received, it will display on real time.
4) RCU reboots
When the RCU is rebooted by the [Reboot] button on the "SYSTEM" screen during operating the Event monitor, the
Event monitor can display the first event data after starting of the RCU.
Reboot the RCU for checking event data from starting of the RCU.
To Next Page
Loading...
