4. Installation, Setup and Check
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
12
DOC No. 7ZPNA4014
4.2. Receiving a configuration data and starting a diagnosis function
4.2.1. Receiving a configuration data of RCU
Start a maintenance operation from receiving a configuration data.
1) Click the [Receive] button.
2) Confirm the completion of reception with a progress bar.
4.2.2. Starting the diagnosis function
The state of VDR/S-VDR system and OK/NG of receiving data can be displayed by the color of
“Diagnosis” lamps. A diagnostic result is displayed as follows.
● (Green): OK
● (Red): NG
● (Orange): Under a diagnosis
1) Click the [Diagnosis] button.
2) Confirm that the color of [Diagnosis] button changes a green color.
* When the [Diagnosis] button is clicked during operating a diagnosis function, it is stopped.
To Next Page
Loading...
