15. Playback Software setup
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
143
DOC No. 7ZPNA4014
15.2. How to play back CF card data in VDR/S-VDR
In order to play back record data of CF card, it is necessary to create a playback folder in the computer of use advance,
and to copy the data.
Show the flow from setup to playback below.
Create a playback folder by My Computer before Setup.
Set required information for playback with Setup software.
Start the Playback software, and copy a record data of CF card.
15.2.1. Create a playback folder
(1) To create a playback folder, start My Computer.
(2) Create a folder as follows.
Playback data is copied to the folder made here.
C:¥MV JRC
↑
E.g. Ship name
15.2.2. Set required information for playback with the Setup software
(1) To start the Setup software, click the [SETUP] button.
(2) The Login screen is indicated, and click the [OK] button after confirming that user is selected in the Operator
block.
To Next Page
Loading...
