15. Playback Software setup
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
144
DOC No. 7ZPNA4014
(3) Eject a CF card from the VDR/S-VDR, and insert it into the CF card slot of used PC.
Then, to import VDR/S-VDR configuration data, select the following file in the CF card and click the [Import]
button. CF card drive changes with used PC.
＊:
¥Init¥SysInfo.dat
(4) Click the [Folder Selection] button, and select a folder created in accordance with the “3.1 Create a playback
folder”.
(5) Click the [Set] button, and setup is completed.
To close the Setup software, click the [Close] button.
CF card drive
To Next Page
Loading...
