4. Installation, Setup and Check
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
64
DOC No. 7ZPNA4014
4.8. VHF connection setup
4.8.1. Setting connection
Enable / Disable of each VHF transceiver connection can be set up.
1) Each channel
Enter a check mark into the check box of connected CH.
y Enable: [9] (checked)
y Disable: [ ] (unchecked)
Opening detail window
Check box
4.8.2. Starting detail setup
The detailed setup window of VHF transceiver is displayed.
Click the [Detail] button on VHF section, a detail setup window is displayed.
4.8.3. Detail setup window of VHF
To Next Page
Loading...
