11. Frame Grabber Board (CKA-137) setup - FGB utility -
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
125
DOC No. 7ZPNA4014
d) Click the [Open] button on file select window.
The following message appears. If "Capture1.txt write NG" message appears, retry to step a) to d).
e) Click the [OK] button on message box.
11.2.5. Capture the Radar image
Capture the Radar image as bellow.
a) Click the
icon on the top of menu.
"Finished the capture image." massage is displayed on left below status bar.
b) Click the
icon.
Captured PNG image is displayed.
To Next Page
Loading...
