11. Frame Grabber Board (CKA-137) setup - FGB utility -
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
124
DOC No. 7ZPNA4014
11.2.4. Set the capture setup
a) Click the [Setup(S)] -> [Ch 1 capture setting] menu.
(If set the channel 2 capture setup, click the [Ch 2 capture setting] menu.)
File select window appears.
b) Click the "CKA137-JCY1800" folder.
(If CKA-137 board installed in JCY-1700, click the "CKA137-JCY1700" folder.)
c) Click the capture setting file. File name is formatted as bellow.
JRC Radar setting: Cap2-"Radar model name"-1800.txt
| |
| CKA-137 board installed in JCY-1800/1850
ex. JMA9900
VESA format setting: Cap2-"Resolution"-"V sync frequency"-1800.txt
Resolution: 800x600, 1024x768, 1152x864, 1280x960, 1280x1024, 1600x1200 pixels
V sync frequency: 60, 70, 72, 75, 85 Hz (1600x1200 resolution is 60 Hz only.)
To Next Page
Loading...
