JRC JCY-1900 - Page 82

Chapter 4 Operation Method
46
3. Check that the image data is received normally.
If the image data is received normally, tap the [Good] button. If the image data can't receive, tap
the [Fail] button. Tapping the [Good] button or the [Fail] button, returns to the IMAGE DATA LIST
screen.
[Information]
The displayed image data can enlarge tapped part. Tapping the screen again, then displayed
image data returns to the original size.
Figure 4-35 IMAGE DATA CHECK screen
[Good] button
IMAGE DATA CHECK screen
[Info.] button
[Fail] button