Chapter 4 Operation Method
63
4.7 Initial Setting of the Heading Angle - [Gyro I/F] Button
If the ship's heading angle data input the synchronous or step signals and the ship's speed data
input the pulse signals, the DAU is required. The gyro interface board is optional.
[NOTE]
If the DAU is added, the CAUTION alert occurs until set the ship's heading angle.
1. Tap the [Gyro I/F] button on the HOME screen. The GYRO SETUP screen is displayed.
Figure 4-56 GYRO SETUP screen
HOME screen
GYRO SETUP screen
Figure 4-55 CAUTION: Gyro I/F uninitialization
To Next Page
Loading...
