JRC JCY-1900 - Page 98

Chapter 4 Operation Method
62
3. Enter the current password in the [Current Password] field.
[Information]
The factory default password is “0000”. Manage the password by the ship administrator.
About how to enter a number, see “4.1.5 Number input”.
4. After tap the [Enter] button, the cursor moves to the [New password] field.
5. Enter the new password in the [New password] field. The password can enter up to 16
characters.
6. After tap the [Enter] button, the cursor moves to the [Verify new password] field.
7. To verify the password, enter the new password again.
[NOTE]
Do not forget the changed password. If the password is forgotten, contact our head office, or a
nearby branch or local office to request servicing.