JRC JCY-1950 - 4.4 Displaying Alert Lists

3. OPERATION CHECKING ON HARDWARE
JCY-1900
/
1950
V
DR Service Manual
49
DOC No. 7ZPNA4409
3) Checking the beacon operation
Monitor an outputting acoustic signal from the beacon with the Beacon checker (7HMNA4001).
• Turn on the beacon tester with turning a volume switch.
• Short-circuit between terminals in order to operate the Beacon.
• If the oscillation sound of the Beacon can be heard, judge that the Beacon is operating normally.
Beacon checker （7HMNA4001）