Need help?Do you have a question about the JRC JMA-5106 and is the answer not in the manual?
General| Type | Marine Radar |
|---|---|
| Output Power | 6 kW |
| Antenna Rotation Speed | 24 rpm |
| Power Supply | 24 VDC |
| Frequency | 9410 MHz |
| Display Size | 10.4-inch |
| Range | Up to 96 nautical miles |
| Range Scales | 0.125 to 48 NM |
| Range Resolution | 25 m |
| Azimuth Resolution | 1.2 degrees |
| Antenna Type | Slotted waveguide array |
Explains pictorial indications, examples, and warning labels for safe operation.
Details safety precautions for operation, including high voltage, maintenance, and scanner unit hazards.
Describes the radar's functions, performance, features, and component composition.
Provides unit configurations and a general system diagram illustrating connections.
Explains the keyboard layout, functions of keys, knobs, jog dial, and track ball.
Details screen display elements and guides on navigating the radar's menu system.
Guides through powering on, tuning, observation, and basic controls like TX/STBY and GAIN/PL.
Covers interference elimination, AUTO-RAIN/SEA, trackball, VRM, EBL, and various display modes.
Explains function keys, software/unit checks, error logs, battery replacement, and options.
Explains how target height, scanner height, and distance affect radar detection range.
Discusses echo characteristics, wave propagation, and how obstacles affect visibility.
Details common types of false echoes and their causes, including ghost, side, and indirect echoes.
Explains how to display SART signals and beacon marks on the radar screen.
Outlines general maintenance like cleaning and screw checks, plus specific unit maintenance.
Provides guidance on identifying and addressing common radar abnormalities and breakdowns.
Guides on requesting repairs, warranty service, and recommended maintenance inspections.
Provides guidelines for the proper disposal of the radar unit, batteries, and magnetron.
Lists general specifications and detailed specs for scanner units NKE-2042, NKE-2062, and NKE-2102.
Provides specifications for processing, keyboard, and display units, including dimensions and features.
Lists specifications for optional components like MARPA, NSK unit, rectifier, and cables.
Emphasizes proper installation for optimal radar capability, troubleshooting, and maintenance.
Provides guidelines for selecting an installation location and procedure for the scanner unit.
Covers indicator unit installation and procedures for connecting various cables and equipment.
Covers adjustments for scanner unit AVR output and tuning, and indicator unit AVR output.
Guides on receiver tuning, frequency, noise level, azimuth, and 0-mile adjustments.
Details scanner unit height setting and master gyro value configuration.
Explains presets for sensitivity, sea clutter, main bang control, and video noise suppression.
Covers settings for small target detection, float mode, interference suppression, target expansion, and function controls.
Guides on configuring GPS, DGPS, and WAAS receivers with various parameters.
Details settings for course/speed input, position input, baud rates, and NMEA output.
Explains display direction, timing, reading/writing to memory, and simulator settings.
Covers special modes for maintenance and resetting adjustments to initial state.
Outlines general maintenance like cleaning and screw checks, plus scanner unit specific maintenance.
Explains how to clean the display's LCD area to maintain clarity and image quality.
To Next Page
