JRC JMA-5106 - Attaching a Cable between a Processing Unit and a Scanner Unit (CFQ-6912-20;30)

129
9.3.8 Attaching a cable between a processing unit and a scanner unit
(CFQ-6912-20/30)
(a) Use this cable for connecting a processing unit and a scanner unit.
(b) Use a cable with the following connector for this radar equipment.
Cable length JRC code Remarks
20m CFQ-6912-20 Standard
30m CFQ-6912-30 Option
After inserting the cable, push the cable to the end.
Cable CFQ-6912-20/30
Connector on both sides
Insert cable CFQ-6912-20/30
in processing unit J2