JRC JMA-5312-6HS - Connect Slave Monitor; Vdr

3.18 CONNECT SLAVE MONITOR / VDR
Install the slave monitor /VDR cable (C
FQ-8914) in t
he radar process unit according to the procedures
below:
(1) Remove the radar process unit cabinet cover, loosen the screws that mount the terminal board to the
cabinet, an
d remove the terminal board from the radar process unit cabinet.
3
(2) Connect CFQ-8914 to J4406 on CDC-1332 as shown in upper photograph.
3-36
All manuals and user guides at all-guides.com