JRC JMA-5322-6HS - Switch Transmitter Pulse Length [Gain; Pl; Switch Azimuth Display Mode [Azi Mode

Simplified Manual
Cancellation
1 Press the [VRM1] or [VRM2] key again.
The selected VRM display will disappear.
2.10 Switch Transmitter Pulse Length [GAIN / PL]
Procedures
1 Press the [GAIN / PL] dial.
The selected pulse length will be displayed in the pulse length indication.
2.11 Switch Azimuth Display Mode [AZI MODE]
Procedures
1 Press the [AZI MODE] key.
The azimuth display modes are switched.
S-10