Simplified Manual
3.3 Canceling Tracked Targets [TGT CNCL]
Canceling targets one by one [TGT CNCL]
Procedures
1 Put the cursor on the tracked target to the desired for canceling target,
and press the [TGT CNCL] key.
The vectors and symbols of the tracked targets will disappear, and only the radar video remain.
Canceling all targets collectively [TGT CNCL]
Procedures
1 Press the [TGT CNCL] key for 5 seconds.
The vectors and symbols of all the targets will disappear, and only the radar video remain.
S-14
To Next Page
Loading...
