2) Setting of baud rate
1) Press and hold [RADAR MENU] key.
Th
e Code Input menu will appear.
2) Press the [0] key, and put the cursor on the ENT button, and press the [ENT] key.
The Serviceman Menu will appear.
3) Open
the Baud Rate menu by performing the following me
nu operation.
2. Installation Menu
→ 5. COM Port Setting
→ 1. Baud Rate
4) Press [1] key.
Sel
ect the baud rate of 1. COMPASS .
4800bps and 38400bps are available. But connecting with 4800bps decreases the performance
of signal process and target tracking.
3) Select the heading device
Press the heading device switching button and select CMPS .
Heading device
switching
3-15
To Next Page
Loading...
