JRC JMA-5322-7 - Page 60

(5) Fasten locations shown in the following photograph to securely fix the coating clip.
(6) Attach the radar process unit cabinet cover and complete the installation of the AIS process circuit.
2) Connecting to AIS
Connect the AIS line to TB4303 of terminal board.
from RADAR to AIS
TB4303
NAV1TXDE
NAV1TXD-
NAV1TXD+
from AIS to RADAR
TB4303
NAV1RXDE
NAV1RXD-
NAV1RXD+
3-31