2-11
[Service Menu]
Keep press “MENU” key 5 second or more, and code input “0”,”enter”
Then [Service Menu] will be open as follows.
Service Menu
0.Exit
1.Equipment
Setup >
→0.Previous
1.Heading Mode SEL Off/On
2.Stern Marker Off/0° H-Up On/
90° H-Up On
3.Language Select English/Dutch/German/Fr
ench
4.Anttena Speed Normal/HS/Composit
5.PRF High/Low/JammiNG
6.Unit Of Range Km/nm/sm
7.Unit Of Speed m/s, km/h, kts
8.Next > → 0.Previous
1.Kind Of Vessel
2.True Trail FUNC.
3.RTH-Up
4.GSFT Soft Key
2.Maintenance
Menu >
→0.Previous
1.Safety Switch Tx-Off/Standby/
Tx-On/IGNORE
2.Partial Master
Reset
Yes or No
3.All Master Reset Yes or No
4.Alarm Setting > → 0.Previous
1.Alarm Function Off/On/NMEA Off
2.AIS Alarm Off/On
3.MAX Target Alarm Off/On
5.BRILL ADJ → 0.Previous
1.BRILL MIN 0-63
2.BRILL MAX 0-63
6.Clear Total Hour Yes or No
7.Clear Running Hour Yes or No
0.Previous
3.SP INIT
Setup >
→ 0.Previous 1.Main 0-255
1.Noise Level > → 2.Setting Mode Off/On
0.Previous
1.MBS Level 0-255
2.MBS > → 2.MBS Area 0-255
0.Previous
1.Bearing ADJ 0.0-359.9
4.Initial
Setting >
→ 2.Range ADJ 0-999
3.Tune ADJ
0-127
4.Tune Indicator ADJ 0-127
5.Anntena Height -5/5-10/10-20/20-m
6.GPS Setting > → 0.Previous
1.GPS1 Process
Setting >
→ 0.Previous
1.Position
2.Geodetic 00-47
3.Send Data Yes or No
4.Next >
↓4.Next
0.Previous
1.Exclusion 00-32
2.Antenna Height 0-8147m
3.Fix Mode 2D/3D/AUTO
4.DOP Level Up to 4/Up to 10/Up to 20
5.Position Average LoNG/Standard/None
0-999
1-999
6.Master Reset Off/On
7.Send Data Yes or No
2.GPS1 DGPS
Setting >
→ 0.Previous
1.Mode AUTO/Manual
2.Frequency 275.0-335.0kHz
3.Baud Rate 50/100/200bps
4.DGPS Mode Off/On
5.Send Data Yes or No
To Next Page
Loading...
Need help?
General
