JRC JMA-9922-9XA User Manual

3.4
BASIC OPER/AIIONS
Move Gross
Cursor
Mark
[+]
by Trackball'
' ' '
Trackball
Trackball
section
left button
aaaaaaaaaaaaoaaaaoaa
aaaoaaaaooaaaoaaaaa
Trackball
section
right button
Scroll
button
No used
The
cross
cursor
mark
[+]
is
used
for
position
designation and
other
purposes
in various
operating
procedures.
The
cross cursor
mark
[+]
moves in conjunction with
the trackball.
lf the trackball is
rotated up and
down or
left and
right, the
cross
cursor mark follows the movements
of
the trackball.
The
distance
and
bearing between
own
ship and
the cross cursor mark
[+]
are
indicated
on
the
upper
right of the
radar
display.
Before
operating
other controls
and switches,
the operator
must be
familiar with
manipulation
of the trackball and
the movements of
the
cross cursor
mark. When
rotating the
trackball,
the
cross cursor
mark
[+l
will
not
move
if the
palm
is
apart
from the
hand
sensor section.
Approach
the
palm
to
the hand sensor
section
and operate the trackball.
When
making
a
menu
or button
selection,
the
"+"
cursor will change to
"rro*
\
Click:
In this manual,
"clicking" refers
to
pressing
the
trackball
button.
Left-bufton
=
This
is called
"left-clicking".
Methods for
Setting
Menu ltems with
the
Trackball'
'
' '
In
addition
to
the
method
for setting
menu items with the
switches,
the trackball
can also
be
used
to
set menu
items
in almost
the same manner
as
with the control
panel.
There
are
several
methods
for
setting an item in a
menu
with the trackball.
3-U

JRC JMA-9922-9XA Specifications

General

Brand	JRC
Model	JMA-9922-9XA
Category	Marine Radar
Language	English