JRC JMA-9922-9XA - Page 106

oooaaaaaoaaaaaaaaaaaaoaaaaaaaoaaaaaaoa
I
II
I
Changing the
Setting of Pull-down Menu
This
method is
used
when there
are three
or more selections:
O
When
PROCI is
set
as shown below:
2. PROCI
lv
@
Move the
anow
cursor
to the
position
that is shown below
(downward
triangle).
@
Set
the
arrow cursor
on the
position
in Figure as
shown
below and
press
the
left
button
on
the
trackball.
@
The
pull-down
menu will appear
and
selection
items
are
displayed in
the menu.
@
Move
the
cursor
with the trackball.
@
Set the
cursor
on the
item to
be selected
and
press
the left-button on
the
trackball.
@
The
pull-down
menu
will
be
closed
and the
setting
is established.
3. PROC2 lv
J-JO
3. PROC2
4.
PROC3
2.
PROC1