JRC JMR-9225-6X - Page 100

Chapter 2 System Configuration 2-42
5 V
G6S-2F-TR_DC5V
24Vdc
OUT 1
RET 1
OUT2～8 are also the same.
TB6～TB11,
TB16, TB17
Normally Open,
Normalli Close,
24Vdc
RET2～8 are also the same.
Fig. 2.4.14 SLC Contact Out detail.
Table 2.4.16 SLC I/O specifications 8
Label
Name
Pin
Signal
Name
I/O
Specification
Detail
J8111 LAN ch.0 - - I/O IEC61162-450
10BASE-T
/ 100BASE-TX
J8112 LAN ch.1 - - I/O IEC61162-450
10BASE-T
/ 100BASE-TX
J8115 GIF_SLC - - I/O Gyro Interface Circuit Internal wiring
TB801 SLC-AOC - - I/O Analog Option Circuit Internal wiring
Note: The number of LAN port that you can use is only 1 port, either J8111 or J8112.