3 Operation of Target Tracking
3.1 Acquiring a Target
1 Click the cursor mode selection button of the Left Tool Bar.
2 Position the cursor on the target you want to acquire and then click.
The target is acquired and an initial acquisition symbol is displayed.
A vector is displayed within 1 min.
手動捕捉された目標
初期捕捉シンボルが表示されます
1分程経過した目標
捕捉シンボルとベクトルが表示されます
3.2 Displaying the Information of Tracking
Targets
1 Click the cursor mode selection button of the Left Tool Bar.
2 Click the tracking target whose numeric values you want to display.
The numerical value data of the specified target is displayed in the right part of the screen.
Manually acquired target
An initial acquisition symbol is displayed.
Target after 1 min has elapsed
An acquisition symbol and a vector are displayed.
19
To Next Page
Loading...
