MF/HF radio equipment
– system ˜ exibility
Connect a remote control
Flexible interfacing
Self-diagnosis
Black box configured
Getting a second operation panel onboard is easy. Connect the controller to the
transceiver and position the controller at a secondary location on the ship. The
second MF/HF station is fully operable and you can transfer saved channel data
to optimise your operation.
Besides connecting a printer and GPS, you can connect the MF/HF to the Remote
Maintenance System (RMS
1
), a system that transmits a variety of information via satellite to
shore, to remotely perform maintenance and management checks – signi cantly reducing
down time and service miscarriage by failure analysis.
With JRC’s MF/HF radio equipment you can perform self-diagnosis checks on the
controller and transceiver, allowing for easy maintenance and more reliability. The
results are directly shown on the screen, you can save as a log (up to 10 possible) or
print the results (with optional printer).
The JSS-2150 is black box con gured and allows for a exible installation approach in
con ned space. Panel, desktop or overhead mounting is possible with this signi cantly in
size reduced MF/HF.
What’s standard in the box?
1. Controller
2
2. Handset
3
3. Transceiver
4. Antenna tuner
5. Cables
6. Manual
Which cables?
Controller to transceiver 5 m
Antenna tuner to transceiver 5 m
2
excluding bracket
3
including cradle
1
JRC (S-) VDR and Fleet 77, FB250 or FB500 must be installed onboard in order to take advantage of JRC's RMS
controller
Antenna tuner
Transceiver
Handset
To Next Page
Loading...
