JRC NCR-330 - Page 2

13 Confirmation of
Programmed Status
Press STATE switch.
14
15
Change the symbol
Alphabet
Press ∆ , ∇ switch.
16 Symbol Alphabet Indicates the selected letter(B1 or B2).
The lamp at the bottom right of the display
Enabled: ON
Disabled: OFF
FUNCTION SETTING
The equipment allows you to select a receiving coast station, a message type, and
receiver status.
No. ITEM SWITCH PRINT, INDICATE NOTE
1 State start MENU STATE PROGRAM START
Select station
Set ENT SET COAST STATION?
∆
Ascending orderChange
Station
∇
Descending order
Enable ENT Bottom right lamp turns on
Disable CLR Bottom right lamp turns off
Detect MENU **Disabled Area : To No.3
2
No set CLR SET COAST STATION? To No.3
Select message
Set ENT SET MESSAGE TYPE?
∆
Ascending orderChange
message
∇
Descending order
Enable ENT Bottom right lamp turns on
Disable CLR Bottom right lamp turns off
Detect MENU **Disabled Message Type:
3
No set CLR SET MESSAGE TYPE? To No.4
Select state
Set ENT SET STATE?
Alarm ENT / CLR ALARM SOUND ON?
ON / OFF
ON : ENT
OFF : CLR
Character
size
ENT / CLR CHARACTER SIZE LARGE?
Large / Normal
L : ENT
N : CLR
4
No set CLR SET STATE?
STATE END
State end
5 State end MENU STATE END