Need help?Do you have a question about the JRC NRD-545 and is the answer not in the manual?
General| Type | HF Receiver |
|---|---|
| Modes | AM, CW, SSB, FM |
| Selectivity | 2.4 kHz at -6 dB (SSB) |
| IF Bandwidths | 2.4 kHz, 6 kHz |
| IF Frequencies | 455 kHz |
| Audio Output | 8 Ohms |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Audio Output Power | 2 W into 8 Ω |
Defines the receiver's operational frequency coverage with optional boards.
Lists supported reception modes including USB, LSB, CW, RTTY, AM, FM, and WFM.
Details receiver sensitivity across various frequency bands and modes (USB, AM, FM, WFM).
Specifies bandwidth options (WIDE, INTER, NARROW) and their associated attenuation.
Outlines the AC and DC voltage requirements and power consumption.
Provides the physical size and approximate weight of the receiver unit.
Details the function of each control, button, and display on the front panel.
Describes the various connectors and terminals located on the rear of the unit.
To Next Page
