42
◎RFP: RF microphone power
Lo 10mW
Hi 50mW
The transmitter comes with 2 stages of RF power output (as per local regulations).
This shows that the RF output is LOW (10mW)
◎ ATT microphone audio input attenuation
ATT oF No attenuation at audio input
ATT on 20dB attenuation at audio
input (depending on whether
the transmitter is provided
with the corresponding
function).
The function is activated with 20dB of audio
input attenuation.
◎ATOF: Automatic microphone o countdown under mute status
OF This function is deactivated
1 1 minute countdown to turn o
10 10 minute countdown to turn o
30 30 minute countdown to turn o
This function is deactivated.
(The default setting is 10 minute.)
RC FRE Only frequency and group
setting will be synchronized
RC ALL All data setting will be
synchronized
◎ RC (Remoset Conguration)
The default setting is rC-FrE.
Only frequency and group setting will be
synchronized.
To Next Page
Loading...
Need help?
General
