Juiced Bikes RipCurrent - Key E-bike Components

8 9
JBP-RC-MANUAL |
©
2021 JUICED BIKESJBP-RC-MANUAL |
©
2021 JUICED BIKES
Electric Motor - The electric motor is built into the hub of the
rear wheel. When power reaches the motor, the motor begins
to spin, propelling the bike forward.
Fig. 5 -
Electric Motor
GENERAL INFORMATION
Gear Shifter - The gear shier changes the rao between the
pedals and the rear wheel. Use it to nd a more comfortable
pedaling cadence under dierent riding condions. Try the low
gear for pedaling during starts, uphill or loaded riding. Choose
the higher gears when pedaling downhill or during faster riding.
The gear shier is located on the right handlebar.
Fig. 6 - Gear Shier
Brakes - The brakes use fricon to slow the bike down. The
levers on the handlebars control the braking. The brakes
have an electrical switch that cuts the power to the electric
motor when the rider uses the brakes. This feature prevents
unintenonal acceleraons while braking.
Fig. 7 - Brake Lever
Fuse - The baery pack has two replaceable 30-amp fuses that
protect the electronics.
Fig. 8 - Fuse
GENERAL INFORMATION