To Next PageTo Next Page
Need help?Do you have a question about the JUKI DLN-415-2 and is the answer not in the manual?
General| Max Stitch Length | 5 mm |
|---|---|
| Needle Type | DB x 1 |
| Presser Foot Lift (Knee) | 13 mm |
| Motor Type | Servo Motor |
| Lubrication System | Automatic |
| Type | Industrial Sewing Machine |
Explains the components and adjustments of the motor lever switch for different motor types.
Detailed instructions for connecting various electrical cords to the machine and control box.
Provides guidance on wiring, fuse usage, ground connection, and cord handling for the control box.
Instructions for adjusting the clutch gap to ensure proper operation and prevent damage.
Essential safety precautions and operating guidelines before using the sewing machine.
Explains the four-stage function of the pedal for stopping, low speed, high speed, and trimming.
How to adjust the thread trimming cam timing for proper thread remaining length.
Details on adjusting the moving knife's position for correct thread scooping and avoiding interference.
Instructions on sharpening the knife blade for optimal cutting power and proper contact.
How to adjust the bobbin thread presser for correct thread trimming and to prevent slippage.
Troubleshooting guide for common electrical malfunctions and their corrective measures.
Troubleshooting steps for skipped stitches at the beginning of sewing.
Steps to take when the magnet sound is heard but thread trimming does not occur.
Troubleshooting when the machine fails to stop at the designated upper or lower positions.
Steps to diagnose and fix needle breakage and unusual sounds from the machine bed.
Electrical circuit diagram for specific models of JUKI sewing machines.
Time chart illustrating the sequence of operations and signals for specific machine models.
