To Next PageTo Next Page
Need help?Do you have a question about the JUKI DLN-5410N-7 and is the answer not in the manual?
General| Brand | JUKI |
|---|---|
| Model | DLN-5410N-7 |
| Category | Sewing Machine |
| Language | English |
Explains DANGER, WARNING, CAUTION, and items requiring special attention.
Details various pictorial warning indications and warning labels with their meanings.
Covers reading manuals, wearing goggles, pacemakers, and safety devices.
Warns against unintended use or modification of the machine.
Stresses the importance of trained operators for safe machine operation.
Lists operations requiring the machine's power to be turned off.
Safety measures for moving, transporting, and unpacking the sewing machine.
Guidelines for installing table, wiring, grounding, and motor for safety.
Crucial checks and safety guidelines before and during machine operation.
Proper use of JUKI genuine oil/grease and safe handling.
Safety precautions for repair, adjustment, and cleaning.
Recommended environmental conditions for safe machine operation.
Specific safety instructions regarding electrical hazards and personal injury.
Clarifies that safety devices may be omitted in illustrations.
Instructions for installing the machine head onto the table and oil pan.
Instructions for installing the belt cover and bobbin winder.
How to adjust the height of the knee lifter.
Steps for attaching the thread stand to the machine.
Guidelines for filling oil pan, checking levels, and break-in operation.
How to adjust oil amount for face plate parts.
Procedure to adjust oil amount in the hook.
Step-by-step guide on how to correctly attach the needle.
Instructions for correctly inserting the bobbin into the bobbin case.
How to adjust stitch length using the feed adjusting dial.
How to adjust the presser foot pressure.
Step-by-step guide for threading the machine head.
How to adjust the tension of the needle thread.
How to adjust the tension of the bobbin thread.
Adjusting the stroke amount of the thread take-up spring.
Adjusting the pressure of the thread take-up spring.
Adjusting thread take-up stroke for different material thicknesses.
How to use the hand lifter to stop the machine.
Procedure for adjusting needle bar height and hook-to-needle clearance.
How to adjust the feed timing for proper stitch formation.
How to set the standard tilt for the feed dog.
Procedure to adjust the vertical height of the feed dog.
How to adjust the height and angle of the presser foot.
How to adjust the stitch width by shifting the needle feed rod.
How to adjust the needle stop position after thread trimming.
How to adjust the lower needle stop position.
How to adjust pedal pressure and stroke.
Procedures for installing and adjusting the pedal angle.
Explanation of pedal operations for sewing, stopping, and thread trimming.
How to adjust the wiper position based on material thickness.
Instructions for operating the one-touch reverse feed stitching.
How to resharpen and reinstall the counter knife.
