Need help?Do you have a question about the JUKI DLU-5494N-7 and is the answer not in the manual?
General| Brand | JUKI |
|---|---|
| Model | DLU-5494N-7 |
| Category | Sewing Machine |
| Language | English |
Attaching the M-91 motor unit to the control box.
Mounting the control box and machine head onto the sewing table.
Instructions for setting the correct belt tension for the M-91 unit.
Steps to adjust the belt cover clearances for the M-91 unit.
Guide to connecting various cables to the control box.
Procedure for installing the optional circuit board.
Steps for connecting the IP-110 operation panel.
Mounting the operation display panel on the machine arm.
Explains the functions of the operation panel's switches and indicators.
Calibrating the bottom feed pitch indicator.
Identifies and explains all buttons and indicators on the operation panel.
Guide to adjusting the LCD screen's brightness and contrast.
Procedure for connecting the production control switch.
Overview of the main operational screens.
Displays various pop-up menus for pattern editing and management.
Details additional screens like pattern register and output displays.
How to choose a pattern from the available selection.
Steps for modifying the parameters of a sewing pattern.
Inputting stitch counts by performing actual sewing.
Choosing between left and right sleeve data for pattern application.
Enabling automatic switching between sleeves for sewing.
Adding or removing individual steps within a pattern.
Configuring reverse stitching at the start and end of sewing.
Procedures for saving new sewing patterns.
How to duplicate existing sewing patterns.
Steps for removing saved sewing patterns.
Counts finished products after thread trimming.
Shows bottom feed amount in direct and ratio displays.
Details on re-sewing and needle position compensation functions.
Control for the material edge sensor operation.
Manages automatic thread trimming and its prohibition.
Enables automatic single-stitch operations.
Accessing and viewing operational data and settings.
Guides on changing and configuring various machine functions.
Details on connecting external devices to the operation panel.
Lists and explains specific error codes displayed on the panel.
To Next Page
