− 72 −
6) Press switch 6 to display the sewing common data screen.
7) Press switch 7 from the first screen of sewing common data setting to display the second screen.
8) Press switch 8 for approximately three seconds from the second screen of sewing common data
setting to change to the third screen.
9) Press switch 9 from the third screen of sewing common data setting to change to the reverse feed
control lever adjustment screen.
6
Procedures of disassembling/assembling
7
8
Information screen (Operator level)
9
The first screen of sewing common data setting
The second screen of sewing common data setting
The third screen of sewing common data setting
To Next Page
Loading...
Need help?
General
