LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (September, 2003) 3/6
Code
0N
0NU
1NA
1NB
2N
4N
4NU
4NT
6N
6NT
8NA
8NB
8NC
8ND
8NE
5N
WHEN YOU PLACE ORDERS
LZ228
LZ228 7
● LZ-2280N series (without automatic thread trimmer)
● LZ-2280N-7 series (with automatic thread trimmer)
Automatic reverse feed function
Provided
Not provided
Code
0B
Auto-lifter
Provided (AK83)
Not provided
Code
AK
●LZ-2284NT, -2286NT and -2285N are not classified
by the automatic reverse feed function.
Wiper and automatic reverse feed function
Wiper
Not provided
Provided
Code
00
0B
W0
WB
Automatic reverse feed function
Not provided
Provided
Not provided
Provided
Type
Standard zigzag
Standard zigzag/with anti-material-slip capability
Standard wider zigzag (with a gauge for 5mm zigzag width)
Standard wider zigzag (with a gauge for 8mm zigzag width)
Standard zigzag/with lower knife
With standard/3-step zigzag stitching pattern changeover function
With standard/3-step zigzag stitching pattern changeover function
and anti-material-slip capability
With standard/3-step zigzag stitching pattern changeover function
and with tape attaching foot capability
3-step zigzag
3-step zigzag/with tape attaching foot
With changeable pattern cams/Standard zigzag
With changeable pattern cams/3-step zigzag
With changeable pattern cams/2-step zigzag
With changeable pattern cams/Standard scalloping
With changeable pattern cams/Crescent scalloping
Fagoting
Type Code
Standard zigzag
(anti-material-slip type)
2N
Standard/3-step zigzag 4N
Standard/3-step zigzag
(anti-material-slip type)
4NU
SC910 S
M91S
● PSC box
● Motor for SC ● Operation panel
Operation panel Code
IP-100B IP100B
CP-160B CP160B
Pulley belt Code
Standard S
PSC box Code
For JUS (LA)
*
Single-phase 100〜120V PFL S
For JUS
*
, General Export 3-phase 200〜240V PFL D
For General Export Single-phase 200〜240V PFL K
For EU (CE) Single-phase 200〜240V PFL N
For China Single-phase 200〜240V PFL U
*JUS: North America and Central and South America.
Control box Code
Standard S