JUKI LS-1300 Series Handbook

LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (September, 2003) 4/6
Right
Left
Right
Left
Right
Left
Right
Left
Right
Left
Right
Left
Right
Left
Right
Left
LZ-2288N SPECIFICATIONS OF PATTERN CAM
OPTIONS
Model Part No. Description Feature
―
―
―
―
―
V059
S189A
S189B
RF-1
225-61559
D1501-583-H00
D1502-583-H00
SS-7091110-SP
225-26669
225-26560
235-23152
235-22550
235-23004
MAV-059000AA
MAS-189000AA
MAS-189000AB
―
Automatic reverse feed kit
Presser bar
Presser
connecting rod
Screw
Non-lubricated hook
(plastic hook with special race surface)
Hard-point hook
Hook
Bobbin case asm.
Bobbin
Tension-free feeder
(tape feeder)
Elastic tape tensing device
Pedal-operated reverse feed stitching
device
This device allows a machine without thread trimmer to perform automatic
reverse feed function.
The aforementioned parts are used when a lockstitching type presser foot is
installed on the machine.
The hook effectively prevents oil stains. ＊When the hook is used, setscrews
are required for the front of the hook-driving shaft (Part No.: 110-79506).
The blade point of this hook prevents abrasion.
The hook with a non-rotational bobbin eliminates sewing troubles resulting
from bobbin idling. It provides a uniform bobbin thread tension at all times,
thereby guaranteeing a consistent stitch formation.
The amount of tape to be fed can be adjusted in accordance with the sewing
speed of the machine.
It is adaptable to processes for attaching reinforcement tape, attaching elastic
tape or lace to foundation.
Applies tension to desired portions of the tape fed from tension-free tape puller.
The device is started/stopped by operating the knee switch. This increases
operator productivity without interrupting the sewing work.
The device enables the operator to perform reverse feed stitching using the
pedal without using the right hand.
(excluding the LZ-2285N)
Presser foot
connecting
components
Hook with non-
rotational bobbin
＊For standard zigzag stitching and blind stitching, set the zigzag width to 5mm or less when the machine runs at a sewing speed of 4,200rpm or more.
Name
of pattern
Part No.
Part name
Max. zigzag
width (mm)
Max. pattern
width (mm)
Number
of stitches
Stitch
pattern
3-step
zigzag
225-68950
Pattern cam
B
8.0
―
6
Standard
zigzag
225-68851
Pattern cam
A
＊6.0
―
2
2-step
zigzag
225-69057
Pattern cam
C
8.0
―
4
Standard
scallop
225-69156
Pattern cam
D
8.0
2.4
24
Crescent
scallop
225-69255
Pattern cam
E
8.0
3.6
24
Equal-width
scallop
225-69354
Pattern cam
F
8.0
3.4
24
Equal-width
scallop
225-69453
Pattern cam
G
8.0
2.4
12
Blind
stitch
225-69552
Pattern cam
H
6.0
―
4
Blind
stitch
225-69651
Pattern cam
J
6.0
―
6
Blind
stitch
225-69750
Pattern cam
K
6.0
―
8
Blind
stitch
225-69859
Pattern cam
L
6.0
―
12
www.egemakine.com.tr

JUKI LS-1300 Series Specifications

General

Brand	JUKI
Model	LS-1300 Series
Category	Sewing Machine
Language	English