JUKI LS-321 - Page 105

MH-481, 481-5(4), 484, 484-5(4), 486-5(4) (June, 2001) 2/2
Model name MH-481 MH-481-5(4) MH-484 MH-484-5(4) MH-486-5(4) Remarks
Condensation stitch ○ ○ ○ ○ ○ Use the reverse stitiching lever
Revers stitch ○ ○ ○ ○ ○ Adjust the stopper
Thread clamp device
―
○
―
○ ○
Needle thread releasing device
―
○
―
○ ○
Needle thread drow-out
―
○
―
○ ○
mechanism
Thread spreader ○ ○ ○ ○ ○
Movable needle guard ○ ○ ○ ○ ○
Sliding presser ― ○ ○ ○ ―
Chain-off thread presser
○ ― Option Option ○
Chain-off thread presser foot for
the MH-480 series
Silicon oil lubricating unit ○ ○ ○ ○ ○
Provided as standard (packed
together with accessories)
Model Part No. Description Remarks
Application
MH-481 MH-481-5(4) MH-484 MH-484-5(4) MH-486-5(4)
AK4
―
 Auto-lifter
―

―
○
―
○○
PF-3
―
 Partial shirring device Upper shirring
―

―

―

―
○
PF-5
―
 Partial shirring device Lower shirring
―

―
×○
―

S060 MAS-06000A0
Attachment for gathering
― ―×○―
(manual type)
Specialized presser foot,
S061
MAS-061000A0
Attachment for intermittent
main feed dog,
― ―×○―

gathering (foot pedal type)
differential-feed dog
● MH-481, MH-481-5(4) ● MH-484, MH-484-5(4)
● MH-486-5(4)
● MH-486□-5(4)
REPLACEABLE GAUGE TABLE
Usage Throat plate Feed dog Presser foot
Light-weight
B1103-481-A00 B1613-481-A00 B1524-481-CC0
materials
Medium-weight
B1103-481-F00 B1613-481-F00 B1524-481-CC0
materials
Heavy-weight
B1103-481-H00 B1613-481-H00 B1524-481-H00
materials
• In addition, a urethane feed dog and coarse feed dog are also
available.
Usage Throat plate
Main feed Differential-
Presser foot
dog feed dog
Light-weight
B1103-484-B00
―――

materials
Medium-weight
material B1103-484-F00 B1613-484-F00 B1653-484-F00 B1524-481-CC0
(standard)
Urethan pad
―
B1613-484-G00 B1653-484-G00
―

Reverse feed
――
B1653-484-C00
―

dog
Gathering
one piece
―――
B1524-481-DA0
of material
• S060 and S061 are optionally available. (Use the presser foot, main feed dog
and differential-feed dog exclusive for this attachment)
Code Usage
Throat
Feed dag
Walking Presser
plate foot foot
Standard type for general runstitch
B3026-487-000 B1524-486-0A0
(rake-in type)
B
For medium turning stitch, gathering stitch
B3026-487-000 B1524-486-BA0
(rake-in type: for preventing uneven mateial feed)
D
For sharp turning stitch
B1103-481-F00 B1613-481-F00 B3026-487-D00 B1524-486-DA0
(pull-in type: for Preventing Puckering)
M
For seaming side of slacks
B3026-487-M00 B1524-486-MAA
(right-compensaling foot for side pockets)
S
For sharp turning stich
B3026-487-S00 B1524-486-SA0
(rake-in type: for Preventing puckering)
OPTIONS
SPECIFICATION CONFIRMATION TABLE WITH TYPES OF MACHINES